[ALN310]
 Type = NDIS
 Title = "AcerLAN ALN-310  10/100 Base-TX Fast Ethernet Adapter"
 Version = 1.2
 DriverName = ALN310$
 XPORTS = NETBEUI LANDD

[File]
 Name = ALN310.DOS
 Path = \NDIS\DOS

[Slot]
 display = "Network Adapter Slot ID."
 type = Decimal
 default = "16"
 range = 16- 26
 step = 1
 optional = Yes
 editable = Yes
 virtual = No
 help = "This parameter specifies which network adapter is used by the driver.
 If you have only one AcerLAN ALN-310  10/100 Base-TX Fast Ethernet Adapter in
 your machine, this parameter is unnecessary!!  For two or more 32-bit PCI LAN
 cards, this parameters is required and cannot be omitted from PROTOCOL.INI.
 The slot ID. for the first LAN card is 16, for the second is 17, and 18 for the
 third, etc.  Default value is 16."

[Sia_Mode]
 display = "Physical Medium Type"
 type = String
 strlength = 14
 default = "AUTODETECT"
 set = AUTODETECT, TP,  TP_FULL_DUPLEX
 optional = No
 editable = Yes
 virtual = No
 help = "This parameter specifies the physical media that the LAN card is
 attached.  The keyword AUTODETECT means driver will auto sense the physical
 media during card initialization.  TP means twisted-pair (RJ-45 or 10BaseT).
 If you want to enable full duplex function of the LAN card, you have to choose
 TP_FULL_DUPLEX as the medium type. The default value is AUTODETECT."

[Data_Rate]
 display = "Data Transmittion Rate"
 type = String
 strlength = 5
 set = MB10, MB100
 optional = Yes
 editable = Yes
 virtual = No
 help = "This parameter specifies the line speed for AcerLAN ALN-310 10/100
 Base-TX Fast Ethernet Adapter card.  This adapter supports two transmittion
 rates, 10Mbps & 100Mbps. The keywords for different transmittion rates are
 MB10 and MB100, respectively.
 This parameters is meaningless for 10M PCI Ethernet card and cannot be set
 if Sia_Mode is AUTODETECT.  The default value is MB100."

[TX_Threshold]
 display = "Transmit FIFO Threshold Level"
 type = String
 strlength = 6
 set = LW128, LW256, LW512, LW1024, FP
 optional = Yes
 editable = Yes
 virtual = No
 help = "This parameter specifies the FIFO threshold level during packet
 transmittion.  The AcerLAN ALN-310  10/100 Base-TX Fast Ethernet Adapter
 support 4 type of threshold levels: 128, 256, 512, 1024 bytes.  If you do not
 enable the early transmit function, set it to FP(Full Packet) mode.  The
 threshold levels for 10M series adapters include 72, 96, 128, 160 bytes.
 The keywords of TX_Threshold are LW128(72bytes), LW256(96 bytes), LW512(128
 bytes), LW1024(160 bytes) and FP(10M PCI card dose not support this mode).
 The default value is LW1024."