Server Driver for Novell NetWare 4.11

   Introduction:
   -------------
   This document describes the procedure to install the NetWare v4.11
   server driver for AcerLAN ALN-201 PCI Ethernet adapter.

   Location of Driver:     \NWSERVER\ALN201.LAN

   Installaton Procedure :
   ---------------------
      Before you start with the installation  process, make sure that
      the Novell NetWare v4.11 server is properly installed.
      Similarly, your adapter should also be properly installed in your
      server.

      1. Insert the AcerLAN Driver Diskette into drive A and check the
         contents of subdirectory  \NWSERVER, It should contain the
         following files:

         ALN201.LANÄÄÄ  Novell NetWare V4.x Server Driver
         ALN201.LDIÄÄÄ  Novell NetWare V4.X Server Driver Installation
                        Information File
         ALN201.INF---  Novell NetWare Client 32 for Windows 95 INF
                        File

      2. If you can log into the server as a admin, copy the ALN201.LAN
         and ALN201.LDI into the NetWare subdirectory SYSTEM of your
         server.

      3. At the  NetWare prompt (indicated by the Server name), run the
         INSTALL.NLM program by typing:

         server_name: LOAD INSTALL <Enter>

      4. Select "Driver Options" and press <Enter>.

      5. Select "Configure network drivers" and press <Enter>.

      6. Select "Discover and load driver" and press <Enter>.

      7. The driver will be auto installed into server.

      8. Exit the INSTALL module.