Windows for Workgroups 3.11 Introduction: ------------- This document describes the procedure to install Microsoft Windows for Workgroups 3.11 driver for AcerLAN ALN-201 PCI ethernet adapter. LOCATION OF DRIVER: \WFW311\ALN201.386 NDIS 3 DRIVER \WFW311\ALN201.DOS NDIS 2 DRIVER \WFW311\ALN201.COM ODI DRIVER Setup Procedure: ---------------- After you run into Windows for Workgroup 3.11: 1. Select the "Network Setup" icon in the Network Group. 2. Click on the "Drivers..." button. 3. If you are replacing a previous LAN adapter select the Remove button to delete that adapter 4. Click on the "Add Adapter" button. 5. Choose Unlisted or Updated Network Adapter. 6. Insert the adapter driver disk in drive "A" and specify the path A:\WFW311 for the location of the driver. 7. Close, and when prompted, restart your computer so that changes take affect. NOTES: ------ 1. Parameters for the PROTOCOL.INI file: AdapterID : This keyword is provided by ALN201, and is required when more than one ALN201 adapters exist on one system. 2. Installing Multiple LAN Adapters: There are two different method to complete it: (a) Under DOS mode, you can modify the AdapterID in file C:\WFW311\PROTOCOL.INI by yourself. (b) Or you can enter Windows for WorkGroup and follow above setup procedure step 2,then click on "Setup.." button, select "Advanced...",fill AdapterID in Value item. Last step to select OK and close NETWORK SETUP. 3. If you select the ODI driver to connect to NetWare and WFW, you have to copy the ODI driver ALN201.COM to windows directory and modify your AUTOEXEC.BAT file as follows: C:\WINDOWS\NET START LSL ;provided by NOVELL C:\WINDOWS\ALN201 ;ALN-201 ODI driver. C:\WINDOWS\ODIHLP.EXE IPXODI ;provided by NOVELL, you can connect to VLM ;NOVELL NetWare.